Skip to main content
Menu

Transport Infrastructure: Request for Tender Documents

(including DPTI Master Specification)

DPTI Request for Tender documents are prepared from standard templates, which are available by clicking on the following links:

DPTI Master specificationEffective date
Specific Introduction & Contract Specific Requirements  
Division G: General1 July 2018Pre - 1 July 2018
Division D: Design (for design & construct contracts only)1 July 2018Pre - 1 July 2018
Division CH: Construction & Handover1 July 2018Pre - 1 July 2018
Division RW: Railways1 July 2018Pre - 1 July 2018
Division R: Roadworks1 July 2018Pre - 1 July 2018
Division CC: Concrete1 July 2018Pre - 1 July 2018
Division S: Structures1 July 2018Pre - 1 July 2018
Division L: Landscape1 July 2018Pre - 1 July 2018
Division P: Professional Services (for AS4122 contracts; includes planning / design only contracts)1 July 2018Pre - 1 July 2018
Division M: Road Maintenance1 July 2018Pre - 1 July 2018
Division W: Marine Works1 July 2018Pre - 1 July 2018

* These documents are currently being reviewed and uploaded. If you cannot locate the part you are looking for please contact: DPTI.ProcurementPolicy@sa.gov.au.

Click Here for a list of products approved for use on DPTI roadworks contracts


Master Specification for Transport Infrastructure

The “Master Specification" is a suite of documents that DPTI uses as the basis of specifications for the design, construction and / or maintenance of road and marine infrastructure.

DPTI only uses the Master Specification under the supervision of professional civil engineers who are trained and experienced in the management of roadworks, bridgeworks and rail contracts. The Specification is designed for use where the Commissioner of Highways or Minister for Transport and Infrastructure is the Principal. Because each part of the Master Specification cross-references other parts, individual parts of the specification cannot be used in isolation. In construction contracts, the "Contract Specific Requirements" will describe any requirements or modifications to the Master Specification that are unique to that particular contract.

The specifications also reference DPTI Test Procedures and Calibration Procedures.

You are welcome to make comments and provide feedback regarding the specifications.  Please contact Corporate Contracting and Procurement on (08) 8343 2029 or email DPTI.Tenders@sa.gov.au for further information about DPTI specifications.

Disclaimer

You may

copy and use these specifications; however, if you use these documents for any purpose which is not consistent with the above (in particular, using them in contracts where the Commissioner of Highways or Minister of Transport is not the Principal), you do so at your own risk.

DPTI makes no representations or warranty that the Specifications have been prepared with reasonable care and does not assume a duty of care to you. DPTI  has no responsibility to inform you of any matter coming to DPTI's notice which may affect the quality of the Specifications in any way. By downloading any specification from this site, you acknowledge and agree to DPTI's Disclaimer

Some documents on this page do not comply with accessibility requirements (WCAG 2.0). If you are having trouble accessing information in these documents, please contact us on (08) 8343 2029.